Your cart

Shop

This is where you can browse products in this store.

RX8 Model

Model Filter

Price Range ($)

Rate Range - slider
$ 20 — $ 13000

Category

Category Filter

Type

Tag Filter

Brand

All Brands Filter

Colour

Colour Filter
Six RX8 rear window buttons in black, blue and red on aluminium tread plate

LEG MOTORSPORT Anodized and UV Resistant Rear Window Button x2 (Red) for Mazda RX8 (Series 1 & 2, 2003-2012)

Anodised aluminium RX8 rear window buttons replace faded plastic latch trims with durable, UV-resistant red to lift the cabin finish.

$50

RX8 leather gearboot surround fitted to centre console with red stitching

LEG MOTORSPORT Leather Gearboot Surround (Red Stitch) for Mazda RX8 (Series 1 & 2, 2003-2012)

Genuine leather and red contrast stitching refresh the shift area, matching the look of factory RS and Spirit R trim without modification.

$150

Mazda RX8 elbow side cushion sealed in clear packaging with red stitching

LEG MOTORSPORT Sport Elbow Side Cushion (Red Stitch) for Mazda RX8 (Series 1 & 2, 2003-2012)

Real leather console-side elbow rest with red stitching, adding genuine comfort to the RX8 cabin for every Series 1 and Series 2 owner.

$150

RX8 Series 1 intake airbox interior with polished circular funnel and ribbed walls

ODULA Big Racing Intake Funnel for Mazda RX8 (Series 1 & 2, 2003-2012)

Drops into the OEM airbox to open intake volume and sharpen throttle response. Retains the factory engine cover and bay layout.

$180

RX8 big bore throttle front view showing gold butterfly plate and black actuator housing

ODULA BIG-BORE Throttle Body for Mazda RX8 (Series 1 & 2, 2003-2012)

Widens the intake passage by approximately 2 mm for sharper throttle response across the rev range. A strong addition to any intake build.

$750

RX8 carbon dash panel angled front view showing three circular meter openings

ODULA Carbon Meter Dash Panel for Mazda RX8 (Series 1, 2003-2008)

Highest-grade carbon meter surround made in Japan by ODULA, replacing the standard Series 1 instrument trim with a precise, driver-focused finish.

$450

Mazda RX8 fresh air grille on silver Series 2, close front view

ODULA Fresh Air Grille (Carbon Fibre) for Mazda RX8 (Series 2, 2009-2012)

Carbon fibre lower-bumper insert that opens the Series 2 front inlet, directing 30% more air into the engine room with a clean composite finish.

$800

ODULA Mazda RX8 piano black grille for Series 2 models

ODULA Fresh Air Grille (Piano Black) for Mazda RX8 (Series 2, 2009-2012)

Replaces the Series 2 front opening insert with a deep gloss piano black finish, adding 30% more airflow into the engine bay.

$750

RX8 intake manifold protector installed beneath intake runners with curved metal pipe passing through cut-out

ODULA Intake Manifold Heat Protector for Mazda RX8 (Series 1 & 2, 2003-2012)

Japanese-made heat shield blocking radiant heat from the intake manifold. Essential when an aftermarket exhaust manifold is fitted.

$120

RX8 OMP heat shield installed vertically beside oil metering pump and wiring

ODULA Oil Metering Pump Heat Shield for Mazda RX8 (Series 1, 2003-2008)

Stainless steel barrier mounts between the exhaust manifold and OMP, shielding a critical lubrication component from damaging radiant heat.

$110

RX8 polyurethane differential mounts with metal sleeves displayed upright on dark fabric

ODULA Polyurethane Reinforced Differential Mounts for Mazda RX8 (Series 1 & 2, 2003-2012)

Reinforced urethane mounts that eliminate diff movement under load, sharpening rear-end feel and reducing axle tramp on corner exits.

$250

RX8 exhaust earth strap pair laid separately on a white background

ODULA Racing Exhaust Earth Strap Set for Mazda RX8 (Series 1 & 2, 2003-2012)

Grounds the RX8 exhaust system with nickel-plated straps rated to 1400°C, cutting static buildup that interferes with sensors and audio.

$80

ODULA Ram Air Intake black racing funnel shown loose from front angle

ODULA Ram Air Intake Type RS for Mazda RX8 (Series 1 & 2, 2003-2012)

Channels cool outside air to the factory airbox, cutting intake temps and sharpening throttle response on the Renesis without permanent modification.

$390

Pair of Mazda RX8 cabin filter elements with blue pleated media and black frames

PIAA Comfort Premium Cabin Filter for Mazda RX8 (Series 1 & 2, 2003-2012)

Three-layer activated-carbon filtration captures pollen, smoke, bacteria and odours. A direct-fit Mazda RX8 cabin filter for all 2003-2012 models.

$70

PROJECT-MU Braided Sports Brake Lines Set for Mazda RX8 (Series 1 & 2, 2003-2012)

Firmer, more consistent brake pedal feel from a PTFE-core, stainless braided hose set that replaces expansion-prone rubber lines.

$400

Mazda RX8 diff cover upright, showing deep cooling fins and blue drain plug

REVOLUTION Big Cooling Diff Cover for Mazda RX8 (Series 1, 2003-2008)

Adds 750cc of diff oil capacity and external cooling fins to tame chronic heat build-up in the Series 1 RX8 differential.

$690

R Magic RX8 nylon shift collar for Series 1 six-speed shifter

R-MAGIC 6-Speed NC Nylon Shift Collar for Mazda RX8 (Series 1, 2003-2008)

Replaces the worn factory plastic collar on the Series 1 six-speed shifter. Restores precise, positive gear selection with a fresh nylon unit from R-MAGIC Japan.

$90

Four red R Magic RX8 coil pack units aligned inside an open cardboard box

R-MAGIC Power Coil Pack for Mazda RX8 (Series 1 & 2, 2003-2012)

A multi-spark RX8 coil pack delivering 46% more output than OEM, restoring clean starts and sharpening torque across the full rev range.

$1,050

RX8 high flow water pump comparison showing silver factory and black R-Magic impellers

R-MAGIC Super High Flow Water Pump for Mazda RX8 (Series 1, 2003-2008)

A redesigned impeller improves coolant circulation in Series 1 RX8s, reducing cavitation and supporting a thorough cooling-system refresh.

$490

RX8 high temperature brake fluid bottle beside red Mazda wheel and tyre

R-MAGIC Super High Temp Racing Brake Fluid for Mazda RX8 (Series 1 & 2, 2003-2012)

Keep pedal feel firm and consistent under hard braking with a wet boiling point of 237°C, well above standard DOT4 fluid.

$120

What owners are saying

GREDDY TRUST Large Capacity Oil Pan for Mazda RX8 (Series 1, 2003-2008) GREDDY TRUST Large Capacity Oil Pan for Mazda RX8 (Series 1, 2003-2008)

Just put my Greddy oil pan on this past week and switched from Royal Purple 5w20 to 5w30. On driving back & looking at my EGT's it is a good 30-40 degrees F cooler than before. Didn't think it would make much/if any difference, but it did. I'm pretty surprised, I guess the extra .5 Quart of oil and/or the aluminum design makes a bit of difference.

Mazda RX8 aftermarket parts Australia owners can explore are available at RX8 Upgrades for maintenance, performance, styling and interior projects. Browse aftermarket and genuine OEM options when replacing a tired component, improving a specific area of the car or refining the overall presentation of your build. Start with the system you are working on, compare the available parts and select options that suit your RX8 and its intended use.

Mazda RX8 aftermarket parts Australia

The catalogue is organised around the areas owners commonly update: performance, genuine OEM, styling and interior. This makes it easier to move from a maintenance or replacement job into related upgrades, whether your focus is cooling and reliability, intake and exhaust, suspension and braking, exterior presentation or a cabin refresh. Browse the relevant category to narrow your search to the parts that support the direction of your RX8.

Performance Upgrades and Genuine OEM Replacements

RX8 performance upgrades should suit the purpose of the car rather than chase a one-size-fits-all result. The right components can improve response, control, cooling, consistency, sound or driving feel, depending on the system being updated. Consider how each part works with the rest of your setup and choose upgrades that make sense for your ownership goals.

For components where factory fit, calibration and known-condition reliability matter, a new genuine OEM part is a practical alternative to a used item with an unknown history. Genuine parts help retain the intended fit and function, making them a sensible choice for restoration-minded owners and for reliable replacement work.

Series 1 and Series 2 RX8 Fitment

Check fitment carefully before ordering, particularly when comparing Series 1 and Series 2 cars. Parts can be specific to a particular version, system or configuration, so confirm the product information against your vehicle before making a final choice. If you are unsure which option applies to your car, seek fitment advice before ordering rather than assuming parts interchange.

RX8 Rarts in Australia from an RX8-focused Store

RX8 Upgrades is an Australian store focused on the Mazda RX8 platform, bringing performance, OEM replacement, styling and interior options together in one catalogue. That focus helps owners shop by the job at hand instead of searching across unrelated vehicle ranges. From straightforward replacement parts to considered Mazda RX8 mods, the aim is to help you build a car that feels cohesive and properly maintained.

Shipping and Support for Your RX8 Build

When planning an order, take the time to review the product details and confirm that each part suits your intended project. For questions about fitment, an order or delivery, contact RX8 Upgrades before proceeding so you can make a more informed purchase. Explore Mazda RX8 aftermarket parts Australia owners can use to maintain, upgrade and personalise their cars with a clear plan.

Frequently Asked Questions

Where can I buy Mazda RX8 aftermarket parts in Australia?

RX8 Upgrades offers Mazda RX8 aftermarket parts in Australia across performance, genuine OEM, styling and interior categories. Whether you are replacing a worn component, improving a particular area of the car or refining its presentation, you can browse parts by the type of project you are planning.

What types of RX8 parts are available?

RX8 parts are available for performance, genuine OEM replacement, styling and interior projects. This makes it easier to shop around the result you want, from maintenance and reliability-focused work to intake and exhaust changes, suspension and braking upgrades, exterior presentation or a cabin refresh.

Should I choose genuine OEM or aftermarket parts for my RX8?

The right choice depends on the job and your build goals. New genuine OEM parts suit owners who value factory-correct fit, calibration and known-condition reliability, while aftermarket parts can support targeted upgrades in areas such as response, control, cooling, sound, feel and presentation.

What are good RX8 performance upgrades to consider?

Good RX8 performance upgrades are the ones that match the area of the car you want to improve. Owners commonly focus on cooling and reliability, intake and exhaust, suspension and braking, or other changes intended to improve response, consistency, control, sound or driving feel without relying on blanket performance claims.

How do I find parts for an RX8 maintenance or replacement project?

Start by identifying the system or area of your RX8 that needs attention, then browse the relevant performance or genuine OEM category. Choosing a new genuine component can provide a known-condition alternative to a used part with an unknown history, while fitment should always be checked before purchase.

Can I shop RX8 upgrades by project?

Yes, shopping by project helps narrow the catalogue to the work you are doing. You can focus your search on maintenance and replacement, cooling and reliability, intake and exhaust, suspension and braking, exterior presentation or interior updates, then compare options suited to that direction.