AUTOEXE Lower Arm Bar (Rear) for Mazda RX8 (Series 1 & 2, 2003-2012)
RX8 Upgrades Front AutoEXE Rotors , Pads and Lines Now to eat , sleep and repeat on the rear Should be able to out brake Clint Jenner at revival now
Everything listed here is selected for Mazda RX8 Series 1 parts Australia owners need to keep their 2003-2008 car running well, refined and on the road longer. Whether you are restoring factory condition or building something sharper, this range covers genuine OEM replacements and proven aftermarket options specific to the early-model RX8.
Price Range ($)
Category
Type
Brand
Colour
AUTOEXE Lower Arm Bar (Rear) for Mazda RX8 (Series 1 & 2, 2003-2012)
RX8 Upgrades Front AutoEXE Rotors , Pads and Lines Now to eat , sleep and repeat on the rear Should be able to out brake Clint Jenner at revival now
AUTOEXE Rear Side Cowl Set for Mazda RX8 (Series 2, 2009-2012)
Autoexe is a reputable aftermarket brand for Mazda. I actually swapped my crackced accordion one for this same one. GOod stuff.
The entire process was seamless and the wheel itself is phenomenal. I really don't know how I'd improve it, other than the stitching color if my car was other than SRC. They don't seem to offer anything but red stitching. I might not have chosen the red centerline marker, but it's growing on me. I'm very pleased overall.
GENUINE MAZDA OEM Intake Solenoid for Mazda RX8 (Series 1 & 2, 2003-2012)
Happy 8's day people! For you series 2 owners, here's the easiest way I found to change these little suckers. RX8 Upgrades providing the genuine goods as always. Remove the air box/ CAI, remove throttle body and remove the top part of the UIM only, this will get you easy access to the solenoids. Now you could remove them from this point, but removing the oil filler neck along with the vacuum chamber the solenoids mount to makes it FAR easier to change them. This whole job can be done in an afternoon for a mechanically minded person. On reassemble, don't forget to place the vacuum reference back onto the bottom of the manifold (has a green check valve) otherwise no valve will work. Reassemble and enjoy. PN is KL01-18-741 for those chasing the part
Huge shout out to RX8 Upgrades for all the bling bits he's supplied so far for my series 1 Steering wheel , GReddy Radiator , Odula intake , Extractors , OMP sheild , Brass gear stick bush , Alternator , GReddy pulley set , New gear stick boot , Magnetic sump plug with a lot more to come ! One of the nicest guys to deal with as well for parts and knowledge on Mazdas is next level !
More cool parts from https://rx8upgrades.com.au/ for the project car number two 🙌🏻 KTS coilovers front and rear AutoEXE two piece rotors front and rear with AutoExe pads Project PMU braided lines in charcoal Raypower 20mm bolt on spacers Fully rebuilt calipers with new pistons One corner done three more to go 🤙🏻 Thanks RX8 Upgrades nothing but the best forget the rest 🏁
The 2003-2008 RX8 is a distinct car with its own fitment, calibration and quirks. Parts selected without that in mind can cause more problems than they solve. However, every listing here is relevant to the Series 1 platform, so you can shop with confidence that what you are looking at was engineered for your car. For Mazda RX8 Series 1 parts Australia-wide, this is the range built specifically around the early-model car.
For owners who want the car to operate exactly as Mazda intended, genuine OEM components are the straightforward answer. Factory-correct fit means no adaptation, no calibration guesswork and no compromise on finish or function.
In addition, a new genuine part removes the unknown history that comes with second-hand components. Worn seals, fatigued springs, or sensors that are borderline but not yet failed are all hidden risks. Meanwhile, genuine Series 1 supply from the original chain continues to narrow over time. Therefore, sourcing them new while stock exists is the practical move.
Not every job calls for a factory replacement. Moreover, aftermarket RX8 Series 1 parts chosen for the early-model car often address areas where the OEM design left room for improvement. Cooling capacity, ignition performance, intake flow and suspension feel are common targets.
The rotary engine is more sensitive than most to consistent oil quality, coolant temperature and strong ignition. As a result, targeted reliability upgrades in those systems pay dividends in long-term dependability. Also, the right aftermarket component, chosen for your car’s condition, can make the Series 1 feel sharper than it did from the factory.
Used consistently, this approach keeps the early-model RX8 doing what it was built to do. Because the right parts matter, it delivers an involving, high-revving driving experience over real kilometres. That is what sourcing the right Mazda RX8 Series 1 parts Australia-wide is ultimately about.
The RX8 Series 1 covers model years 2003 to 2008. If your car falls within that range, it is a Series 1 and the parts listed under this category are the ones to browse first.
Check the fitment details on each individual product listing before ordering. If your car has been modified from its original configuration, compare the listed part against your vehicle carefully, as aftermarket changes can affect compatibility.
Yes, genuine Mazda components are available within this range. A new genuine part gives you factory-correct fit, calibration and finish, and removes the uncertainty of unknown wear history that comes with used or sourced second-hand parts.
Genuine OEM parts restore factory operation and finish exactly as Mazda intended, making them the straightforward choice for standard replacements. Aftermarket parts suit owners looking to tailor driving feel, presentation or build direction beyond the factory specification, with the right choice depending on the component and how the car is used.
Not necessarily. Series 1 (2003-2008) and Series 2 (2009-2011) RX8 models differ in several areas, including sensors, body components and some mechanical parts. Always confirm the stated fitment on the individual product listing before purchasing.
Yes, this range includes both factory-style replacements and aftermarket components suited to a considered ownership approach. Addressing worn components alongside relevant upgrades at the same time is a practical way to support long-term Series 1 reliability.
Where practical, yes. Grouping related servicing or replacement work together saves labour time and avoids disturbing the same area of the car twice. The product listings can help you identify what else may be worth addressing at the same time.