GENUINE MAZDA OEM GT Front Bumper for Mazda RX8 (Series 2, 2009-2012)

Factory-correct GT unpainted front bumper to restore crash damage or give a Series 1 the full Series 2 GT facelift. LAST ONES IN AUSTRALIA!!!

Part details

This RX8 GT front bumper is the genuine Mazda OEM panel for the Series 2 GT-spec nose. It suits owners repairing crash damage or converting a Series 1 to the sharper Series 2 GT face. All factory mounting points, washer-jet cut-outs and intake openings are present from the mould, so fitting follows the original Mazda procedure without modification. RX8 GT Front Bumper Key Features Genuine Mazda OEM new old stock part ensures exact dimensional accuracy, correct panel gaps and factory-spec rigidity, no fitment guesswork. These bumpers are flexible polypropylene (PP) plastic, so it absorbs minor impacts without cracking and responds to heat forming if needed during paint prep. All factory mounting locations are built in, along with pre-cut openings for the headlight washer jets, the large central grille aperture and the sculpted side intakes. Supplied in an unpainted primer-ready finish, so a body shop can prepare and paint it to your car's exact colour code without stripping any factory coat first. Finally, this is one of the last OEM units sourced directly through Mazda Australia, genuine front bumpers for the RX8 are increasingly hard to source as OEM supply winds down. For RX8 enthusiasts doing a full Series 1 to Series 2 facelift, the bumper is the centrepiece of a wider refresh. It pairs directly with the GT front lip to complete the lower front end. The GENUINE MAZDA OEM GT-Spec Front Lip Replacement, 3 Pieces (Complete Set) fills the lower chin with the correct factory profile, while the GENUINE MAZDA OEM GT-Spec Front Lip Replacement, 2 Piece (Left & Right) is an alternative if you only need the outer sections. Contact us about the fog lights, fog light surrounds, chrome garnish, grille, headlight washers, Series 2 headlights, front guards and the associated brackets, we have all the OEM parts needed to complete the conversion. To finish the front end with an aftermarket touch, ask about the carbon fibre grille and eyeliner we stock, or the AUTOEXE Front Under Spoiler (Piano Black) for a subtle lip alternative. For official Mazda parts references, the Mazda Automotive Parts Australia catalogue confirms genuine part numbers for the Series 2 GT bumper assembly.

Listed fitment

Model
Series 2 (2009-2012)
Model
Series 1 (2003-2008)

Part information

SKU
OM-GTFB-S2
Brand
GENUINE MAZDA OEM

Is this a genuine Mazda part or an aftermarket reproduction?

This is a genuine Mazda OEM front bumper, sourced directly through Mazda Australia. It is not an aftermarket reproduction, so you get exact dimensional accuracy, correct panel gaps and factory-spec polypropylene construction identical to what left the factory on a Series 2 GT.

Will this GT front bumper fit a Series 1 RX8?

The bumper itself can be fitted to a Series 1 as part of a facelift conversion, but it is not a direct bolt-on. A full Series 1 to Series 2 GT facelift also requires Series 2 headlights, front guards, GT front lip, grille, fog lights, fog light surrounds, chrome garnish, headlight washers and associated brackets. Contact us for the complete list of OEM parts needed.

Does it come painted or ready to paint?

The bumper is supplied in an unpainted, primer-ready finish. Your body shop can prepare and paint it directly to your car's exact colour code without having to strip any factory coat first.

Are all the mounting points, grille openings and washer jet cut-outs already in the mould?

Yes. All factory mounting locations, the large central grille aperture, sculpted side intake openings and headlight washer jet cut-outs are pre-formed in the mould, so fitting follows the standard Mazda procedure without any modification or cutting.

Why is the bumper made from polypropylene and does that matter?

Polypropylene (PP) is the same flexible plastic Mazda used on the original bumper. It absorbs minor impacts without cracking and responds well to heat forming during paint preparation, which is a practical advantage over more rigid aftermarket materials.

Are these still available through Mazda dealers?

Genuine OEM front bumpers for the RX8 are increasingly difficult to source as Mazda's OEM supply winds down. The units available through RX8 Upgrades are among the last sourced directly through Mazda Australia, so availability is genuinely limited.

What other parts do I need to complete the Series 2 GT front-end look?

Beyond the bumper, a full Series 2 GT front conversion requires the front grille, fog lights, fog light surrounds, chrome garnish, headlight washers, GT front lip (2-piece or 3-piece complete set), Series 2 headlights, front guards and the associated bumper, headlight and central guide brackets. RX8 Upgrades stocks all of these OEM parts, so contact us to put together the full kit.

Can I add an aftermarket touch to the front end once the bumper is fitted?

Yes. RX8 Upgrades stocks a carbon fibre grille and carbon fibre eyeliner that work directly with the Series 2 GT bumper apertures, as well as the AUTOEXE Front Under Spoiler in Piano Black as a subtle lip alternative, all of which complement the factory GT front end without modifying the bumper itself.