Firmer, more consistent brake pedal feel from a PTFE-core, stainless braided hose set that replaces expansion-prone rubber lines.
Independent reviews of this product gathered from other stores and owner communities.
KTS coilovers front and rear
AutoEXE two piece rotors front and rear with AutoExe pads
Project PMU braided lines in charcoal Raypower 20mm bolt on spacers
Fully rebuilt calipers with new pistons
One corner done three more to go 🤙🏻 Thanks RX8 Upgrades nothing but the best forget the rest 🏁
More cool parts from https://rx8upgrades.com.au/ for the project car number two 🙌🏻 KTS coilovers front and rear AutoEXE two piece rotors front and rear with AutoExe pads Project PMU braided lines in charcoal Raypower 20mm bolt on spacers Fully rebuilt calipers with new pistons One corner done three more to go 🤙🏻 Thanks RX8 Upgrades nothing but the best forget the rest 🏁
$400
RX8 braided brake lines from PROJECT-MU are a complete hose replacement set for every Mazda RX8 built between 2003 and 2012. Rubber factory hoses expand under hydraulic pressure, softening the pedal and blurring the driver’s feedback. This set replaces all four with braided lines engineered to hold that pressure firmly, restoring a direct, consistent connection between your foot and the callipers.
For RX8 enthusiasts, the most immediate change is pedal feel. Soft, spongy response from aged rubber hoses is replaced by a firmer, more confident stroke. Brake inputs become easier to modulate precisely, which matters on a back road as much as on a track day.
These Mazda RX8 braided brake lines pair logically with the CUSCO Strut Brace Type OS (Front) with Brake Cylinder Stopper, which reduces master-cylinder movement under hard braking to sharpen the hydraulic feel this set establishes. Finish the brake-system refresh with the AUTOEXE Brake Fluid Cap for a tidy, matched reservoir top. Project Mu brake lines Australia buyers can read more about the manufacturer at PROJECT-MU’s official site.
Independent reviews of this product gathered from other stores and owner communities.
KTS coilovers front and rear
AutoEXE two piece rotors front and rear with AutoExe pads
Project PMU braided lines in charcoal Raypower 20mm bolt on spacers
Fully rebuilt calipers with new pistons
One corner done three more to go 🤙🏻 Thanks RX8 Upgrades nothing but the best forget the rest 🏁
More cool parts from https://rx8upgrades.com.au/ for the project car number two 🙌🏻 KTS coilovers front and rear AutoEXE two piece rotors front and rear with AutoExe pads Project PMU braided lines in charcoal Raypower 20mm bolt on spacers Fully rebuilt calipers with new pistons One corner done three more to go 🤙🏻 Thanks RX8 Upgrades nothing but the best forget the rest 🏁
| RX8 Model | |
|---|---|
| Colour |
Related RX8 Upgrades
Yes, the PROJECT-MU braided brake lines set is designed to fit all Mazda RX8 models from Series 1 (2003-2008) through to Series 2 (2009-2012), so the one set covers the full production run.
Each hose in this set uses a PTFE inner core, a stainless steel braid layer and a clear PVC outer covering. The stainless braid resists hose expansion under hydraulic pressure, which is what the standard rubber hoses are prone to, and that resistance is what translates into a firmer, more direct pedal feel.
The improvement comes from reduced hose expansion. Original rubber brake hoses can balloon slightly under pressure, introducing a degree of sponginess into the pedal. A braided stainless line resists that expansion, making pedal inputs feel more immediate and consistent, particularly during repeated hard braking.
Installation gaskets are included with the set, providing the sealing hardware required when fitting the hoses. This keeps the replacement lines and their associated sealing components together for the job.
The clear PVC covering sits over the stainless steel braided mesh as a protective outer layer, guarding the braid against road debris and environmental wear while still allowing the braided construction to be visible.
A brake service is the ideal time to swap in braided lines, since the system will already be partially stripped and bled. Replacing ageing rubber hoses with this set during planned maintenance avoids revisiting the same job twice and ensures all flexible hoses are in known condition from that point forward.
The hoses in this set are turquoise in colour, visible through the clear PVC outer layer over the stainless steel braid.
