Shop

This is where you can browse products in this store.

RX8 Model

Model Filter

Price Range ($)

Rate Range - slider
$ 20 $ 13000

Category

Category Filter

Type

Tag Filter

Brand

All Brands Filter

Colour

Colour Filter
Blue-tinted anti-glare glass cuts harsh headlight glare from following traffic at night, while adding a clean blue accent to the RX8 cabin.

$160

Sharpen the Series 1 bumper profile with a urethane lip that arrives unpainted, ready for a precise colour-matched finish.

$1,080

Carbon-fibre housings and integrated LEDs give the Series 1 rear end a sharper, more deliberate look than the factory lamps.

$2,400

A factory-new genuine Mazda engine assembly for Series 2 RX8 owners. Zero kilometres, built to OEM spec, with rotors, seals, flywheel, water pump and oil pan included.

$13,000

Zero-kilometre RX8 Renesis short motor for Series 1 engine replacement, sourced direct from Mazda’s production line in Japan.

$13,000

Sharpen chassis response and dial in stance with fully adjustable DFV damping and separate ride-height control for street or circuit use.

$3,630 inc GST

Crack and peel on the steering wheel centre is a known SE3P fault. A new OEM cover restores factory finish exactly.

$500

Leather-trimmed, flat-bottom RX8 red stitch steering wheel with a thicker rim and thumb grip. Retains airbag and switch compatibility.

$600

Upgraded Nappa leather flat-bottom wheel with AUTOEXE emboss, dimpled thumb grips, and red contrast stitching. Factory airbag and controls fully retained.

$600

New genuine leather shift knob with red stitching restores the Series 2 cabin’s factory look and tactile quality at the most-touched interior control.

$390

Replace isolated intake parts with a coordinated ODULA, KTS and GREDDY TRUST induction package for sharper throttle response.

Price range: $90 through $390 inc GST

Tubular stainless header that sharpens throttle feel, frees the Renesis to rev, and transforms the exhaust note.

$1,400

Stainless RX8 cat-back exhaust with a 60.5mm main pipe and oval 110x95mm tip. Sharper response, refined sports tone, no highway drone.

$1,650

Higher torque and faster cranking for every Renesis start. Addresses hot-start trouble and weak turnover across all 2003-2012 manual RX8 models.

$390

Eliminates driveline play at the differential and subframe to deliver sharper gear changes and a more settled, connected feel through every corner.

$380

Factory rear lamps replaced with 160-LED Red Jewel assemblies and selectable sequential indicators. Direct plug-and-play fit for all RX8 years, no wiring cuts needed.

Original price was: $1,500.Current price is: $830.

Smoked lenses, 160 high-brightness LEDs and selectable sequential indicators give your RX8 a sharper rear signature with a genuine plug-and-play fit.

Original price was: $1,500.Current price is: $830.

Raises charging output from roughly 90A to 150A, giving accessory-heavy RX8 builds genuine electrical headroom and stable ignition voltage all the way to the redline.

$780

Ditch the factory prop rod for gas-assisted bonnet support that holds hands-free. Cleaner bay access on every service, detail or show.

$360

Stick-on RX8 headlight protection film that clears yellowed Series 1 lenses and locks that clarity in for good.

$140

What owners are saying

ODULA Ram Air Intake Type RS for Mazda RX8 (Series 1 & 2, 2003-2012) ODULA Ram Air Intake Type RS for Mazda RX8 (Series 1 & 2, 2003-2012)

Trip from Sunshine Coast to Gold Coast was a blast ! Car feels so much better, so much more throttle response, so much cooler. Highly recommend changing Autoexe Type F radiator+KTS Suction Tube+ODULA Ram air 🫶🫶🫶🫶 ARD High speed starter motor makes cold start+hot start lightning fast. Supplied by RX8 Upgrades 🔥🔥

Mazda RX8 aftermarket parts Australia owners can explore are available at RX8 Upgrades for maintenance, performance, styling and interior projects. Browse aftermarket and genuine OEM options when replacing a tired component, improving a specific area of the car or refining the overall presentation of your build. Start with the system you are working on, compare the available parts and select options that suit your RX8 and its intended use.

Mazda RX8 aftermarket parts Australia

The catalogue is organised around the areas owners commonly update: performance, genuine OEM, styling and interior. This makes it easier to move from a maintenance or replacement job into related upgrades, whether your focus is cooling and reliabilityintake and exhaustsuspension and braking, exterior presentation or a cabin refresh. Browse the relevant category to narrow your search to the parts that support the direction of your RX8.

Performance Upgrades and Genuine OEM Replacements

RX8 performance upgrades should suit the purpose of the car rather than chase a one-size-fits-all result. The right components can improve response, control, cooling, consistency, sound or driving feel, depending on the system being updated. Consider how each part works with the rest of your setup and choose upgrades that make sense for your ownership goals.

For components where factory fit, calibration and known-condition reliability matter, a new genuine OEM part is a practical alternative to a used item with an unknown history. Genuine parts help retain the intended fit and function, making them a sensible choice for restoration-minded owners and for reliable replacement work.

Series 1 and Series 2 RX8 Fitment

Check fitment carefully before ordering, particularly when comparing Series 1 and Series 2 cars. Parts can be specific to a particular version, system or configuration, so confirm the product information against your vehicle before making a final choice. If you are unsure which option applies to your car, seek fitment advice before ordering rather than assuming parts interchange.

RX8 Rarts in Australia from an RX8-focused Store

RX8 Upgrades is an Australian store focused on the Mazda RX8 platform, bringing performance, OEM replacement, styling and interior options together in one catalogue. That focus helps owners shop by the job at hand instead of searching across unrelated vehicle ranges. From straightforward replacement parts to considered Mazda RX8 mods, the aim is to help you build a car that feels cohesive and properly maintained.

Shipping and Support for Your RX8 Build

When planning an order, take the time to review the product details and confirm that each part suits your intended project. For questions about fitment, an order or delivery, contact RX8 Upgrades before proceeding so you can make a more informed purchase. Explore Mazda RX8 aftermarket parts Australia owners can use to maintain, upgrade and personalise their cars with a clear plan.

Frequently Asked Questions

Where can I buy Mazda RX8 aftermarket parts in Australia?

RX8 Upgrades offers Mazda RX8 aftermarket parts in Australia across performance, genuine OEM, styling and interior categories. Whether you are replacing a worn component, improving a particular area of the car or refining its presentation, you can browse parts by the type of project you are planning.

What types of RX8 parts are available?

RX8 parts are available for performance, genuine OEM replacement, styling and interior projects. This makes it easier to shop around the result you want, from maintenance and reliability-focused work to intake and exhaust changes, suspension and braking upgrades, exterior presentation or a cabin refresh.

Should I choose genuine OEM or aftermarket parts for my RX8?

The right choice depends on the job and your build goals. New genuine OEM parts suit owners who value factory-correct fit, calibration and known-condition reliability, while aftermarket parts can support targeted upgrades in areas such as response, control, cooling, sound, feel and presentation.

What are good RX8 performance upgrades to consider?

Good RX8 performance upgrades are the ones that match the area of the car you want to improve. Owners commonly focus on cooling and reliability, intake and exhaust, suspension and braking, or other changes intended to improve response, consistency, control, sound or driving feel without relying on blanket performance claims.

How do I find parts for an RX8 maintenance or replacement project?

Start by identifying the system or area of your RX8 that needs attention, then browse the relevant performance or genuine OEM category. Choosing a new genuine component can provide a known-condition alternative to a used part with an unknown history, while fitment should always be checked before purchase.

Can I shop RX8 upgrades by project?

Yes, shopping by project helps narrow the catalogue to the work you are doing. You can focus your search on maintenance and replacement, cooling and reliability, intake and exhaust, suspension and braking, exterior presentation or interior updates, then compare options suited to that direction.