HKS Hi-Power Cat-Back Exhaust with Titanium Tip for Mazda RX8 (Series 1 & 2, 2003-2012)
Bolt-on 75mm SUS304 cat-back system with a burnt titanium outlet, freeing rear exhaust flow and giving the Renesis a fuller, crisper rotary note.
Part details
The RX8 titanium tip exhaust from HKS is a complete cat-back replacement engineered for the Renesis rotary. It swaps the restrictive OEM rear section for 75mm SUS304 stainless piping and a straight-through muffler. The result is freer breathing from the midrange right up to the redline. That rewards the rotary's appetite for revs with a sharper, fuller exhaust character. RX8 Titanium Tip Exhaust Key Features 75mm SUS304 stainless piping replaces the narrower OEM rear section, supporting freer exhaust flow across the rev range. The 97mm outlet carries a burnt titanium tip , lending the car a distinct Japanese performance signature at the rear bumper. Straight-through muffler internals reduce back-pressure. The note stays composed at cruise, with minimal drone for daily driving. An offset muffler layout maintains a clean under-car profile , sitting within the OEM envelope without clearance concerns. Finally, supplied clamps and mounting hardware mean this titanium tip exhaust system is ready to bolt on without sourcing additional fitment parts. For rotary enthusiasts, the real reward shows up on the open road. Expect a crisper throttle response and a more vocal Renesis note as revs climb. The blue-burnt outlet against stainless bodywork is a considered finishing detail. It sets this apart from a generic aftermarket tip. This RX8 cat-back suits daily drivers wanting a more engaging drive and weekend builds chasing a cohesive performance look. Running an RX8 titanium tip exhaust in Australia pairs naturally with the HKS Metal Catalyzer , keeping the upstream catalyst section matched to the same engineering pedigree. For a purposeful exterior accent echoing the exhaust's Japanese performance theme, the ODULA Fresh Air Grille (Carbon Fibre) adds a complementary visual detail at the front end. Learn more about HKS engineering on the official HKS website .
Listed fitment
- Model
- Series 1 (2003-2008)
- Model
- Series 2 (2009-2012)
Part information
- SKU
- HK-EXH-S1S2
- MPN
- 31006-BZ001
- Brand
- HKS
- Colour
- Blue, Chrome
Does the HKS Hi-Power cat-back exhaust fit both Series 1 and Series 2 RX8 models?
Yes, the HKS Hi-Power cat-back exhaust is confirmed to fit both Series 1 RX8 models (2003-2008) and Series 2 RX8 models (2009-2012), so there is no need to source different part numbers for each generation.
What pipe diameter does the HKS Hi-Power RX8 exhaust use?
The system uses 75mm SUS304 stainless steel piping through the cat-back section, with a 97mm burnt titanium outlet tip at the rear.
What does the burnt titanium tip actually look like?
The 97mm titanium outlet develops a characteristic blue-to-gold heat colouration, giving the rear of the car a distinct Japanese performance aesthetic that contrasts with the polished stainless piping.
Is this a straight-through design or does it retain a muffler?
The HKS Hi-Power system uses an offset muffler with straight-through internals, reducing restriction through the rear exhaust section while keeping a tidy under-car arrangement and avoiding the excessive drone of a fully unmuffled setup.
How does the HKS Hi-Power change the sound of an RX8?
The system produces a deeper idle note and a crisper sound through the rev range, which suits the rotary engine's high-revving character. HKS have tuned the internals to deliver this without significant cabin drone at cruising speeds.
Is installation straightforward, and does it come with all the hardware needed?
The HKS Hi-Power is a bolt-on cat-back system and is supplied with clamps and mounting hardware, so no additional fasteners should be required for a standard fitment.
Which part of the exhaust system does this replace?
This is a cat-back system, meaning it replaces the exhaust from behind the catalytic converter to the rear tip. The front pipe and catalytic converter are retained, keeping emissions equipment in place.
Are there any companion parts worth fitting at the same time?
Fitting the APEXi Strengthened Exhaust Hanger Set is a sensible addition when installing a new exhaust, as upgraded hangers properly support the system's weight and reduce stress on mounting points. An intake refresh with a performance panel filter is also a popular pairing to complement the freer exhaust flow.