Your cart

Shop

This is where you can browse products in this store.

RX8 Model

Model Filter

Price Range ($)

Rate Range - slider
$ 20 — $ 13000

Category

Category Filter

Type

Tag Filter

Brand

All Brands Filter

Colour

Colour Filter
RX8 side indicators individually bubble wrapped on a blue quilted surface

GENUINE MAZDA OEM Clear Side Indicator Set for Mazda RX8 (Series 1, 2003-2008)

Renew cloudy or aged Series 1 guard-mounted repeaters with genuine Mazda clear lenses that fit correctly from day one, supplied as a matched pair.

$90

Close-up of RX8 exhaust surrounds beside tailpipe on red Series 1 bumper

GENUINE MAZDA OEM Exhaust Aluminium Surround Inserts for Mazda RX8 (Series 1, 2003-2008)

Restore the Series 1 rear bumper with genuine Mazda aluminium exhaust surround inserts. Factory-correct fit and finish for a complete OEM result.

$300

RX8 Recaro plastic insert locations circled on GT driver's seat shoulder bolsters

GENUINE MAZDA OEM GT/Spirit R Recaro Plastic Insert Replacement for Mazda RX8 (Series 2, 2009-2012)

Restore the shoulder-bolster trim on factory GT and Spirit R Recaro seats with a genuine Mazda insert. Factory fit, factory finish.

Price range: $120 through $225

View Options
RX8 handbrake lever viewed from above, showing black leather grip and silver button

GENUINE MAZDA OEM Handbrake Lever Leather Upgrade (Black Stitch) for Mazda RX8 (Series 1 & 2, 2003-2012)

Worn or cracked handbrake lever grip? This genuine leather-wrapped RX8 handbrake lever with black stitching restores factory tactile quality across both generations.

$440

RX8 red stitch handbrake fitted beside gearshift boot, viewed from driver's seat

GENUINE MAZDA OEM Handbrake Lever Leather Upgrade (Red Stitch) for Mazda RX8 (Series 1 & 2, 2003-2012)

Swap a cracked or faded original for a genuine Mazda leather handbrake lever. Red stitching ties the cabin together.

$440

GENUINE MAZDA OEM Handbrake Lever Standard (No Stitch) for Mazda RX8 (Series 1 & 2, 2003-2012)

Replace a worn cabin touchpoint with a factory-correct RX8 handbrake lever. Black no-stitch finish suits all 2003-2012 models.

$220

Genuine Mazda RX8 headlights close-up showing black housing and projector lens in cardboard packaging

GENUINE MAZDA OEM Headlights L&R for Mazda RX8 (Series 1, 2003-2008)

New genuine Mazda left and right headlights for Series 1. Replace aged or damaged housings with factory-correct OEM units of known condition.

$2,900

RX8 ignition coil set single black coil in front of four Mazda boxes

GENUINE MAZDA OEM Ignition Coils Complete Set (N3H1-18-100C x 4) for Mazda RX8 (Series 1 & 2, 2003-2012)

Restore consistent spark across every rotor position with a matched set of four genuine Mazda N3H1-18-100C coils, the latest revision used in RX8 GT, R3 and Spirit R models.

$390

RX8 shifter boot surround front view with black leather gaiter and mounting tabs

GENUINE MAZDA OEM Leather Gear Shifter Boot Surround for Mazda RX8 (Series 1 & 2, 2003-2012)

Restore the gear-lever surround to factory condition with genuine Mazda leather. Correct fit, correct finish, with none of the uncertainty of a used part.

$120

GENUINE MAZDA OEM MT Engine Mount Set for Mazda RX8 (Series 1 & 2, 2003-2012)

New genuine Mazda engine mounts restore factory drivetrain support in manual RX8s, keeping engine movement controlled and shift feel consistent.

$390

Several RX8 oil dipstick units in clear sleeves with yellow loop handles on carpet

GENUINE MAZDA OEM Oil Dipstick for Mazda RX8 (Series 1, 2003-2008)

Restore clear engine-oil checks on a Series 1 rotary with a new genuine Mazda RX8 oil dipstick, replacing a bent, faded or unreadable original.

$110

RX8 Series 2 oil dipstick pair in clear protective sleeves on black carpet

GENUINE MAZDA OEM Oil Dipstick for Mazda RX8 (Series 2, 2009-2012)

New OEM oil dipstick restores clear, accurate oil-level checks on Series 2 cars. A known-condition genuine part, not a used unknown.

$110

Black RX8 seat adjuster tab in clear bag on textured dark mat

GENUINE MAZDA OEM Power Seat Adjuster Tab for Mazda RX8 (Series 1 & 2, 2003-2012)

Restore powered seat control with a genuine Mazda RX8 seat adjuster tab. Factory-correct fit, known-condition quality, black finish.

$35

Sealed RX8 radiator hose set showing a curved black hose in Mazda packaging

GENUINE MAZDA OEM Radiator Hose Replacement Set for Mazda RX8 (Series 1 & 2, 2003-2012)

Replace ageing coolant hoses with factory-correct rubber. This RX8 radiator hose set covers all three main connections in one purchase.

$150

Mazda RX8 radiator sub tank front view with hose and electrical connector

GENUINE MAZDA OEM Radiator Sub-Tank (Revision C) for Mazda RX8 (Series 1 & 2, 2003-2012)

Replace an ageing or cracked coolant overflow bottle with Mazda’s own Revision C reservoir, supplied with its matching OEM cap. Restores factory-correct overflow containment across every RX8 from 2003 to 2012.

$250

RX8 boot brake lamp cover fitted below the illuminated centre brake light

GENUINE MAZDA OEM Rear Boot Brake Lamp Cover for Mazda RX8 (Series 1 & 2, 2003-2012)

New genuine Mazda red trim piece for the high-mount stop lamp. Restores factory colour, clip fit and rear presentation on any RX8.

$100

Single black RX8 exhaust surrounds trim shown from the outer face on white

GENUINE MAZDA OEM Rear Bumper Exhaust Surround Set for Mazda RX8 (Series 1, 2003-2008)

New genuine Mazda RX8 exhaust surrounds restore the deep black finish around each tailpipe outlet. A matched set keeps both sides consistent.

$200

RX8 rear exhaust surround beneath red bumper beside exhaust tip and rear tyre

GENUINE MAZDA OEM Rear Bumper Exhaust Surround Set for Mazda RX8 (Series 2, 2009-2012)

Renews the black exhaust outlet trim on a Series 2 rear bumper with a factory-correct fit, restoring the clean, matched appearance Mazda intended.

$120

RX8 leather sliding panel shown loose from above with red stitching and release latch

GENUINE MAZDA OEM Sliding Centre Panel (Leather, Red Stitch) Upgrade for Mazda RX8 (Series 1 & 2, 2003-2012)

Leather-trimmed centre panel with red stitching replaces the plain sliding panel for a cohesive, factory-option cabin finish across all RX8 models.

$400

RX8 sliding centre panel top view showing black textured standard finish and release catch

GENUINE MAZDA OEM Sliding Centre Panel (Standard, No Stitch, No Leather) for Mazda RX8 (Series 1 & 2, 2003-2012)

Replace a scratched or worn centre-console cover with a new genuine part in standard plain finish. The correct restoration for any RX8 cabin, Series 1 or Series 2.

$200

What owners are saying

AUTOEXE Motion Control Beam Front and Rear for Mazda RX8 (Series 2, 2009-2012) AUTOEXE Motion Control Beam Front and Rear for Mazda RX8 (Series 2, 2009-2012)

Night and day difference, even on a bone stock suspension. While installing the AutoExe front strut bar greatly enhanced steering response and turn in, the handling improvements from it was very subtle. Likewise with the AutoExe tie bars installed in the front and back of the car. More solid feel, less suspension parts deflection under cornering loads. These Motion Control Beams took away the vibrations that are slightly felt in the steering wheel from small road surface imperfections. It also took away the bumps felt from pavement gaps and mostly the rumble felt from railway crossings and brick roads. Going through small pot holes and road patches, the stock suspension is finally doing its job to dampen away those bumps and doesn't get fully transmitted throughout the entire car. Big bumps, you don't hear a loud hollow "thump" emanating from the back of the car. Just a solid "thud". The car used to understeer and now it hardly does. It handles quite neutral now, even on bone stock open differential, and did I already say bone stock suspension? This is win win, all around, without sacrificing anything.

CAR SHOP GLOW Passenger Footrest Plate (Aluminium) for Mazda RX8 (Series 1 & 2, 2003-2012) CAR SHOP GLOW Passenger Footrest Plate (Aluminium) for Mazda RX8 (Series 1 & 2, 2003-2012)

Well I broke down and bought this since I didn't want the girlfriend putting her feet up on the dash on long trips or when she can't sit still. This is still set up for the RHD cars, but with a little rigging you can get it to work. It took me about an hour to put in the illuminated shifter, and about 3 hours to figure this out and put it in place. I had to replace the bolts it came with sheet metal screws and a few lock washers, but its in. Its actually pretty comfortable, and I just hope it helps keep the feet off the dash.

Mazda RX8 aftermarket parts Australia owners can explore are available at RX8 Upgrades for maintenance, performance, styling and interior projects. Browse aftermarket and genuine OEM options when replacing a tired component, improving a specific area of the car or refining the overall presentation of your build. Start with the system you are working on, compare the available parts and select options that suit your RX8 and its intended use.

Mazda RX8 aftermarket parts Australia

The catalogue is organised around the areas owners commonly update: performance, genuine OEM, styling and interior. This makes it easier to move from a maintenance or replacement job into related upgrades, whether your focus is cooling and reliability, intake and exhaust, suspension and braking, exterior presentation or a cabin refresh. Browse the relevant category to narrow your search to the parts that support the direction of your RX8.

Performance Upgrades and Genuine OEM Replacements

RX8 performance upgrades should suit the purpose of the car rather than chase a one-size-fits-all result. The right components can improve response, control, cooling, consistency, sound or driving feel, depending on the system being updated. Consider how each part works with the rest of your setup and choose upgrades that make sense for your ownership goals.

For components where factory fit, calibration and known-condition reliability matter, a new genuine OEM part is a practical alternative to a used item with an unknown history. Genuine parts help retain the intended fit and function, making them a sensible choice for restoration-minded owners and for reliable replacement work.

Series 1 and Series 2 RX8 Fitment

Check fitment carefully before ordering, particularly when comparing Series 1 and Series 2 cars. Parts can be specific to a particular version, system or configuration, so confirm the product information against your vehicle before making a final choice. If you are unsure which option applies to your car, seek fitment advice before ordering rather than assuming parts interchange.

RX8 Rarts in Australia from an RX8-focused Store

RX8 Upgrades is an Australian store focused on the Mazda RX8 platform, bringing performance, OEM replacement, styling and interior options together in one catalogue. That focus helps owners shop by the job at hand instead of searching across unrelated vehicle ranges. From straightforward replacement parts to considered Mazda RX8 mods, the aim is to help you build a car that feels cohesive and properly maintained.

Shipping and Support for Your RX8 Build

When planning an order, take the time to review the product details and confirm that each part suits your intended project. For questions about fitment, an order or delivery, contact RX8 Upgrades before proceeding so you can make a more informed purchase. Explore Mazda RX8 aftermarket parts Australia owners can use to maintain, upgrade and personalise their cars with a clear plan.

Frequently Asked Questions

Where can I buy Mazda RX8 aftermarket parts in Australia?

RX8 Upgrades offers Mazda RX8 aftermarket parts in Australia across performance, genuine OEM, styling and interior categories. Whether you are replacing a worn component, improving a particular area of the car or refining its presentation, you can browse parts by the type of project you are planning.

What types of RX8 parts are available?

RX8 parts are available for performance, genuine OEM replacement, styling and interior projects. This makes it easier to shop around the result you want, from maintenance and reliability-focused work to intake and exhaust changes, suspension and braking upgrades, exterior presentation or a cabin refresh.

Should I choose genuine OEM or aftermarket parts for my RX8?

The right choice depends on the job and your build goals. New genuine OEM parts suit owners who value factory-correct fit, calibration and known-condition reliability, while aftermarket parts can support targeted upgrades in areas such as response, control, cooling, sound, feel and presentation.

What are good RX8 performance upgrades to consider?

Good RX8 performance upgrades are the ones that match the area of the car you want to improve. Owners commonly focus on cooling and reliability, intake and exhaust, suspension and braking, or other changes intended to improve response, consistency, control, sound or driving feel without relying on blanket performance claims.

How do I find parts for an RX8 maintenance or replacement project?

Start by identifying the system or area of your RX8 that needs attention, then browse the relevant performance or genuine OEM category. Choosing a new genuine component can provide a known-condition alternative to a used part with an unknown history, while fitment should always be checked before purchase.

Can I shop RX8 upgrades by project?

Yes, shopping by project helps narrow the catalogue to the work you are doing. You can focus your search on maintenance and replacement, cooling and reliability, intake and exhaust, suspension and braking, exterior presentation or interior updates, then compare options suited to that direction.