Shop

This is where you can browse products in this store.

RX8 Model

Model Filter

Price Range ($)

Rate Range - slider
$ 20 $ 13000

Category

Category Filter

Type

Tag Filter

Brand

All Brands Filter

Colour

Colour Filter
Fresh OEM leading and trailing plugs restore correct Renesis ignition, addressing hard starts, rough idle and overdue plug services on all RX8 models.

$290 inc GST

Upgrade the Series 2 front end with a genuine matched pair carrying the deep shadow-chrome interior unique to Spirit R specification.

$2,900 inc GST

The genuine Mazda Spirit R rear lamp units, left and right. Deep black internal bezels and new gaskets are included for a sealed, factory-correct installation.

$1,650 inc GST

Restore sun protection and mirror access with a new genuine Mazda grey visor, factory-correct in fit and finish for all RX8 models.

Price range: $170 through $325 inc GST

Replace all three accessory drive belts on Series 1 models with factory-correct genuine Mazda components, restoring reliable drive to the water pump, alternator and air conditioning circuits.

$120 inc GST

Replace worn accessory belts with factory-matched components. This RX8 Series 2 belt kit covers the water pump, alternator and air conditioning drives.

$120 inc GST

Restore factory wheel presentation with a matched set of four genuine Mazda OEM wheel centre caps, keeping every hub looking clean and consistent.

$80 inc GST

Drop-in AIRINX-GT panel filter renews the factory airbox with improved airflow and reliable filtration for every RX8 service interval.

$90 inc GST

Raises coolant boiling point by increasing system pressure, giving the RX8 cooling system real headroom against localised boiling under load.

$40 inc GST

Adds 1 litre of oil capacity and integrated cooling fins to keep the Renesis lubricated and cooler under hard driving.

$488 inc GST

Double-pleated filter media captures more particulate across the full service interval, giving your Renesis a clean, known-condition start every oil change.

$25 inc GST

Double-pleated filter paper expands media area for superior oil cleanliness across every service interval on the Series 2 Renesis.

$25 inc GST

A 5000 gauss neodymium magnet intercepts fine ferrous debris at every oil change, protecting Renesis apex seals and bearings between service intervals.

$70 inc GST

Pre-cut carbon-look side decals add a sharp profile accent to the RX8 body lines while leaving the original paint untouched beneath.

$150 inc GST

Applies directly over yellowed 2009-2012 lenses to restore clarity and block further UV damage. Pre-cut for Series 2 headlights, no trimming needed.

$180 inc GST

A 150-cell metallic-core catalytic converter that flows more freely than the factory ceramic unit, sharpening the Renesis exhaust note without decat harshness.

Original price was: $2,600.Current price is: $2,179. inc GST

Swap the factory rubber intake pipe for a rigid polished aluminium tube. Sharper throttle feel, stable airflow geometry, cleaner engine bay.

$250 inc GST

Monotube Japanese coilovers with 15-way damping and full ride-height adjustment. The sporting RX8 coilover kit Australia enthusiasts have been asking for.

$1,860 inc GST

Anodised aluminium RX8 rear window buttons replace degraded original plastic. UV-resistant black finish holds colour in direct Australian sun.

$50 inc GST

Anodised aluminium replacements for worn plastic rear latch buttons. UV-resistant blue finish keeps both RX8 rear window buttons matched and sharp.

$50 inc GST

What owners are saying

ODULA Big Racing Intake Funnel for Mazda RX8 (Series 1 & 2, 2003-2012) ODULA Big Racing Intake Funnel for Mazda RX8 (Series 1 & 2, 2003-2012)

I am happy with the mod. Very happy. Taka s recommended first mod list: Sway bar. Odula intake or similar. Brake pads. I think it is no worse. I actually think the power opens up after 6000rpm without losing anything at all below 3000rpm. There is no extra noise when you have windows up and turn on the radio. Certainly, Zaku has talked about the moo noise while cruising at 6000 rpm. Well, I have to say it is a very small cow then. I am happy that it is no big noise, since that would indicate a good seal and laminated air flow to the air box.

ARD Advanced Power Starter Motor for Mazda RX8 (Series 1 & 2, 2003-2012) ARD Advanced Power Starter Motor for Mazda RX8 (Series 1 & 2, 2003-2012)

Trip from Sunshine Coast to Gold Coast was a blast ! Car feels so much better, so much more throttle response, so much cooler. Highly recommend changing Autoexe Type F radiator+KTS Suction Tube+ODULA Ram air 🫶🫶🫶🫶 ARD High speed starter motor makes cold start+hot start lightning fast. Supplied by RX8 Upgrades 🔥🔥

GENUINE MAZDA OEM Intake Solenoid for Mazda RX8 (Series 1 & 2, 2003-2012) GENUINE MAZDA OEM Intake Solenoid for Mazda RX8 (Series 1 & 2, 2003-2012)

Happy 8's day people! For you series 2 owners, here's the easiest way I found to change these little suckers. RX8 Upgrades providing the genuine goods as always. Remove the air box/ CAI, remove throttle body and remove the top part of the UIM only, this will get you easy access to the solenoids. Now you could remove them from this point, but removing the oil filler neck along with the vacuum chamber the solenoids mount to makes it FAR easier to change them. This whole job can be done in an afternoon for a mechanically minded person. On reassemble, don't forget to place the vacuum reference back onto the bottom of the manifold (has a green check valve) otherwise no valve will work. Reassemble and enjoy. PN is KL01-18-741 for those chasing the part

AUTOEXE Sports Steering Wheel (Red Stitch) for Mazda RX8 (Series 1, 2003-2008) AUTOEXE Sports Steering Wheel (Red Stitch) for Mazda RX8 (Series 1, 2003-2008)

Stepping the wheel game up! Got this beauty from RX8 Upgrades. Highly recommend getting one of these AutoExe Steering wheels for your rx8. The middle section with slotted material allows you to grip the wheel so much better, The grooves for thumb placement is so comfortable and the flat bottom is so good to hold while cruising down the highway!

Mazda RX8 aftermarket parts Australia owners can explore are available at RX8 Upgrades for maintenance, performance, styling and interior projects. Browse aftermarket and genuine OEM options when replacing a tired component, improving a specific area of the car or refining the overall presentation of your build. Start with the system you are working on, compare the available parts and select options that suit your RX8 and its intended use.

Mazda RX8 aftermarket parts Australia

The catalogue is organised around the areas owners commonly update: performance, genuine OEM, styling and interior. This makes it easier to move from a maintenance or replacement job into related upgrades, whether your focus is cooling and reliabilityintake and exhaustsuspension and braking, exterior presentation or a cabin refresh. Browse the relevant category to narrow your search to the parts that support the direction of your RX8.

Performance Upgrades and Genuine OEM Replacements

RX8 performance upgrades should suit the purpose of the car rather than chase a one-size-fits-all result. The right components can improve response, control, cooling, consistency, sound or driving feel, depending on the system being updated. Consider how each part works with the rest of your setup and choose upgrades that make sense for your ownership goals.

For components where factory fit, calibration and known-condition reliability matter, a new genuine OEM part is a practical alternative to a used item with an unknown history. Genuine parts help retain the intended fit and function, making them a sensible choice for restoration-minded owners and for reliable replacement work.

Series 1 and Series 2 RX8 Fitment

Check fitment carefully before ordering, particularly when comparing Series 1 and Series 2 cars. Parts can be specific to a particular version, system or configuration, so confirm the product information against your vehicle before making a final choice. If you are unsure which option applies to your car, seek fitment advice before ordering rather than assuming parts interchange.

RX8 Rarts in Australia from an RX8-focused Store

RX8 Upgrades is an Australian store focused on the Mazda RX8 platform, bringing performance, OEM replacement, styling and interior options together in one catalogue. That focus helps owners shop by the job at hand instead of searching across unrelated vehicle ranges. From straightforward replacement parts to considered Mazda RX8 mods, the aim is to help you build a car that feels cohesive and properly maintained.

Shipping and Support for Your RX8 Build

When planning an order, take the time to review the product details and confirm that each part suits your intended project. For questions about fitment, an order or delivery, contact RX8 Upgrades before proceeding so you can make a more informed purchase. Explore Mazda RX8 aftermarket parts Australia owners can use to maintain, upgrade and personalise their cars with a clear plan.

Frequently Asked Questions

Where can I buy Mazda RX8 aftermarket parts in Australia?

RX8 Upgrades offers Mazda RX8 aftermarket parts in Australia across performance, genuine OEM, styling and interior categories. Whether you are replacing a worn component, improving a particular area of the car or refining its presentation, you can browse parts by the type of project you are planning.

What types of RX8 parts are available?

RX8 parts are available for performance, genuine OEM replacement, styling and interior projects. This makes it easier to shop around the result you want, from maintenance and reliability-focused work to intake and exhaust changes, suspension and braking upgrades, exterior presentation or a cabin refresh.

Should I choose genuine OEM or aftermarket parts for my RX8?

The right choice depends on the job and your build goals. New genuine OEM parts suit owners who value factory-correct fit, calibration and known-condition reliability, while aftermarket parts can support targeted upgrades in areas such as response, control, cooling, sound, feel and presentation.

What are good RX8 performance upgrades to consider?

Good RX8 performance upgrades are the ones that match the area of the car you want to improve. Owners commonly focus on cooling and reliability, intake and exhaust, suspension and braking, or other changes intended to improve response, consistency, control, sound or driving feel without relying on blanket performance claims.

How do I find parts for an RX8 maintenance or replacement project?

Start by identifying the system or area of your RX8 that needs attention, then browse the relevant performance or genuine OEM category. Choosing a new genuine component can provide a known-condition alternative to a used part with an unknown history, while fitment should always be checked before purchase.

Can I shop RX8 upgrades by project?

Yes, shopping by project helps narrow the catalogue to the work you are doing. You can focus your search on maintenance and replacement, cooling and reliability, intake and exhaust, suspension and braking, exterior presentation or interior updates, then compare options suited to that direction.