RX8 Red Colour Range - Red Parts and Accessories for Mazda RX8

The RX8 red colour range brings together red-finish parts and accessories for owners building a cohesive red theme across their car. Whether you are working on cabin accents, exterior details or finishing touches, use this range to find and compare colour-matched options as they are listed.

RX8 Model

Model Filter

Price Range ($)

Rate Range - slider
$ 20 — $ 13000

Category

Category Filter

Type

Tag Filter

Brand

All Brands Filter
Factory colour-matched fuel flap in Velocity Red Mica with chrome trim. A discontinued OEM piece built specifically for red RX8s.

$340 inc GST

Only 1.000000 left!

In stock

Genuine BRIDE Zeta IV Low Max bucket seat in red, with RX8-specific rails and airbag adapters included for a complete cabin conversion.

$3,940 inc GST

Replace mismatched fasteners with matching red heads and stainless collars for a neater exterior finish. A four-piece set covering both RX8 generations.

$30 inc GST

Swap the factory plastic brake reservoir cap for a red anodised aluminium piece that adds a deliberate colour accent to an often-overlooked engine-bay detail.

$80 inc GST

Nappa leather and red stitching transform the most-touched cabin control on every drive. Adjustable height lets you dial in exactly the right hand position.

$180 inc GST

Machined red anodised aluminium cap lifts the most-handled service point on a Series 1 engine bay from functional to finished.

$60 inc GST

Red anodised aluminium twist oil cap built for Series 2 filler points, adding a machined, purposeful look to a regularly handled engine-bay detail.

$60 inc GST

Aluminium locating collars that remove factory mounting clearance, making the RX8 feel quieter, smoother and more tied together over bumps.

$190 inc GST

Leather-trimmed, flat-bottom RX8 red stitch steering wheel with a thicker rim and thumb grip. Retains airbag and switch compatibility.

$600 inc GST

Upgraded Nappa leather flat-bottom wheel with AUTOEXE emboss, dimpled thumb grips, and red contrast stitching. Factory airbag and controls fully retained.

$600 inc GST

New genuine leather shift knob with red stitching restores the Series 2 cabin’s factory look and tactile quality at the most-touched interior control.

$390 inc GST

Factory rear lamps replaced with 160-LED Red Jewel assemblies and selectable sequential indicators. Direct plug-and-play fit for all RX8 years, no wiring cuts needed.

Original price was: $1,500.Current price is: $830. inc GST

Raises charging output from roughly 90A to 150A, giving accessory-heavy RX8 builds genuine electrical headroom and stable ignition voltage all the way to the redline.

$780 inc GST

Cast iron sport discs with six slits per side, carbon and silicon content controlled for strength. They are heat-treated to suppress distortion and improve fade and crack resistance over OEM.

$1,050 inc GST

Two-piece rotors cut unsprung mass and manage heat under hard braking. Duralumin bell housing, ventilation fins and cleaning slits suit any RX8 from 2003-2012.

$2,000 inc GST

Seven-sided red lug nuts replace plain stock hardware with a sharp colour accent that sharpens every wheel centre.

$190 inc GST

Multilayer polyester silicone replaces the factory intake hose for noticeably sharper acceleration response and a striking red finish in the engine bay.

$380 inc GST

Swap worn OEM plastic for nappa leather and red contrast stitching, giving every manual shift a sharper, more refined feel.

$180 inc GST

Replaces the full intake path with a matched ram air system, sharpening throttle response and bringing out the Renesis induction note.

$1,680 inc GST

Full-length adjustable RX8 adjustable coilover suspension for both generations. Tune ride height and damping for fast-road or track use.

$1,800 inc GST

What owners are saying

Red is one of the most striking choices an RX8 owner can make. Done well, it rewards a considered, consistent approach across the build. This collection gathers red-finish parts and accessories in one place, making it straightforward to compare what is available and plan where each detail sits.

A handful of well-chosen red components, placed deliberately, can elevate the whole presentation. Moreover, the effect works without looking forced.

Building a red theme on your RX8

Red works at every scale. For example, a single cabin accent can be enough on its own. Alternatively, you can carry the colour through interior trim, stitching and exterior finishing pieces. However, the key is matching finish and tone across components. A gloss red exterior trim piece rarely sits comfortably alongside a matte or anodised red interior item. Therefore, browse the RX8 red colour range with your existing colour palette in mind. Also, consider each addition in relation to what is already fitted.

For owners researching a red Mazda RX8 build in Australia, this collection is a practical starting point. Whether you are refining a daily driver or working toward a more complete themed build, sourcing colour-tagged parts here keeps comparisons RX8-specific. In addition, you are not adapting generic aftermarket items and hoping the result holds together.

What is in the red parts collection

  • Cabin accents and interior details: red-finish items that sharpen the interior without a full retrim. For example, shift components, pedal hardware and stitched or anodised trim pieces all feature here.
  • Exterior finishing parts: colour-matched details that add intent to the car’s appearance. Moreover, they complement both factory and modified bodywork.
  • Accessories and finishing touches: the smaller items that complete a build. Finally, they signal that the red theme was planned rather than assembled by accident.

A note for buyers researching a red Mazda RX8 for sale

This range covers parts and accessories for RX8 owners. It is not a classifieds listing. However, if you searched for a red RX8 for sale and landed here, you are in useful company. The RX8 red colour range is a solid reference for what a well-executed red build looks like.

It is also a ready source of parts once you have the car in your garage. Check back regularly, because colour-tagged products are added as they become available. For broader Mazda ownership information, Mazda Australia is worth bookmarking alongside this resource.

Frequently Asked Questions

What kinds of RX8 parts and accessories are available in red?

The red colour range on RX8 Upgrades covers parts and accessories finished in red, spanning cabin accents, exterior details and finishing touches. Products are added as they become available, so checking back regularly will show the latest colour-tagged options.

Can I build a coordinated red theme across both the interior and exterior of my RX8?

Yes. Red works as a subtle accent in the cabin or as part of a stronger consistent theme that extends to exterior details. The key is matching the finish of each addition to your existing trim, exterior colour and other selected components so the result looks deliberate rather than mismatched.

Is this a listing of red RX8 cars for sale, or does it cover parts and accessories only?

This is a parts and accessories range only, not a vehicle classifieds listing. It is intended for RX8 owners wanting to add or coordinate red details on the car they already own.

How do I make sure red additions look intentional rather than out of place on my build?

Consider the finish type and tone of each red part alongside your existing interior trim, exterior paint and other components before purchasing. Building the theme gradually, one well-chosen piece at a time, tends to produce a more cohesive result than adding several unrelated items at once.

Are new red-finish products added to this range over time?

Yes. Colour-tagged products are listed as they become available, so the range grows as suitable red-finish parts and accessories are stocked. Checking back periodically is the best way to find newly added options.