Your cart

Mazda RX8 LED Headlights and Lighting Parts

Mazda RX8 LED headlights, Xenon components and cabin lighting parts for owners replacing worn lamps or lifting the car’s exterior and interior presentation. Covers common positions across both series, from headlights and side indicators to number plate and reversing lights.

RX8 Model

Model Filter

Price Range ($)

Rate Range - slider
$ 20 — $ 13000

Type

Tag Filter

Brand

All Brands Filter

Colour

Colour Filter

GENUINE MAZDA OEM Taillights L&R Set for Mazda RX8 (Series 1, 2003-2008)

Only one set in stock at this price (Only RHS box was opened and closed). Never fitted, still 100% as-new condition.

Original price was: $800.Current price is: $710. inc GST

Only 1 left!

In stock

GENUINE MAZDA OEM Taillights L&R Set for Mazda RX8 (Series 1, 2003-2008)

Replace faded, cracked or damaged rear lights with a matched left and right pair of genuine Mazda taillights, guaranteed to fit and function exactly as the factory intended.

$800 inc GST

RX8 carbon LED taillights illuminated on the rear of a blue Series 1

RE-Amemiya Carbon LED Taillights for Mazda RX8 (Series 1, 2003-2008)

Carbon-fibre housings and integrated LEDs give the Series 1 rear end a sharper, more deliberate look than the factory lamps.

$2,400

Mazda RX8 LED taillights with red lenses and black housings displayed on Valenti box

VALENTI Red Jewel LED “Revo” Taillights for Mazda RX8 (Series 1 & 2, 2003-2012)

Factory rear lamps replaced with 160-LED Red Jewel assemblies and selectable sequential indicators. Direct plug-and-play fit for all RX8 years, no wiring cuts needed.

Original price was: $1,500.Current price is: $830.

Black RX8 rear view with Mazda RX8 LED taillights illuminated at night

VALENTI Smoked LED “Revo” Taillights for Mazda RX8 (Series 1 & 2, 2003-2012)

Smoked lenses, 160 high-brightness LEDs and selectable sequential indicators give your RX8 a sharper rear signature with a genuine plug-and-play fit.

Original price was: $1,500.Current price is: $830.

RX8 headlight protection film graphic showing a curved pre-cut sheet and before-after headlight panels

HASEPRO Magical Art Revival Pre-Cut Headlight Protection and Restoration Film for Mazda RX8 (Series 1, 2003-2008)

Stick-on RX8 headlight protection film that clears yellowed Series 1 lenses and locks that clarity in for good.

$140

RX8 side indicators individually bubble wrapped on a blue quilted surface

GENUINE MAZDA OEM Clear Side Indicator Set for Mazda RX8 (Series 1, 2003-2008)

Renew cloudy or aged Series 1 guard-mounted repeaters with genuine Mazda clear lenses that fit correctly from day one, supplied as a matched pair.

$90

Genuine Mazda RX8 headlights close-up showing black housing and projector lens in cardboard packaging

GENUINE MAZDA OEM Headlights L&R for Mazda RX8 (Series 1, 2003-2008)

New genuine Mazda left and right headlights for Series 1. Replace aged or damaged housings with factory-correct OEM units of known condition.

$2,900

RX8 boot brake lamp cover fitted below the illuminated centre brake light

GENUINE MAZDA OEM Rear Boot Brake Lamp Cover for Mazda RX8 (Series 1 & 2, 2003-2012)

New genuine Mazda red trim piece for the high-mount stop lamp. Restores factory colour, clip fit and rear presentation on any RX8.

$100

Front comparison of red RX8 Spirit R headlights with darker lenses above lighter lenses

GENUINE MAZDA OEM Spirit R Headlights L&R for Mazda RX8 (Series 2, 2009-2012)

Upgrade the Series 2 front end with a genuine matched pair carrying the deep shadow-chrome interior unique to Spirit R specification.

$2,900

RX8 Spirit R taillights installed on red RX8 rear with circular lamp elements

GENUINE MAZDA OEM Spirit R Taillights L&R for Mazda RX8 (Series 2, 2009-2012)

The genuine Mazda Spirit R rear lamp units, left and right. Deep black internal bezels and new gaskets are included for a sealed, factory-correct installation.

$1,650 inc GST

RX8 headlight protection film graphic showing a curved pre-cut sheet and before-after headlight panels

HASEPRO Magical Art Revival Pre-Cut Headlight Protection and Restoration Film for Mazda RX8 (Series 2, 2009-2012)

Applies directly over yellowed 2009-2012 lenses to restore clarity and block further UV damage. Pre-cut for Series 2 headlights, no trimming needed.

$180

What owners are saying

AUTOEXE Premium Cat-Back Exhaust Muffler for Mazda RX8 (Series 1 & 2, 2003-2012) AUTOEXE Premium Cat-Back Exhaust Muffler for Mazda RX8 (Series 1 & 2, 2003-2012)

Just installed my spanking new Autoexe Stainless Muffler, and here's a short take of my initial impressions: The Autoexe catback is lovely - very unique 2 box design and the tips are the tapered kind (ie cut at an angle) each lasercut with the Autoexe logo. Very nicely polished midpipe which connects beautifully (and easily) with the exhaust outlet. Most importantly, the exhaust tips have a perfect visual alignment, unlike other exhausts i've seen where one tip protrudes out more than the other. The Autoexe definitely doesn't have this problem. Also, the 2 box design has a lower profile than stock. Previously, i used to scrape and even dent the exhaust box when clearing humps or even parking - not so with the Autoexe. The Autoexe performs really well, at least on my AT. There is a noticable increase in low end torque, and the car just feels substantially lighter. Revs are much more responsive, and the slight lag felt when launching the car seems to have melted away. Linear acceleration is also much faster (at least across 1st 3 gears), and i'm reaching 120-130kmh much faster on 2nd gear alone (NB mine is the 4spd AT). I'm very pleased with the low-torque gains on the Autoexe - finally i have that slight 'lurch' from start which the manuals seem to have, but the ATs don't. The Autoexe starts off idle with a really low, bassy growl. When first installed, it was barely audible, but sounds louder now. In time, the db will increase to an extent. On higher RPM revs, exhaust sounds deep and wet, and def not those shrilly Remus' we hear on the expressways from time to time. Installation was a breeze, and took under an hour at Monster Garage at Ubi, who's the only authorized dealer in Singapore, so these guys know their stuff. The torque/hp improvement was a shocker esp on low end, esp when mine's an AT. I've heard of bros installing Fujitsubos and HKSs that have either no or negative benefit. In this respect, I'm mighty pleased with the Autoexe. Sound is not loud, but a soft low bassy growl when idle, which develops into a mature wet sound at higher revs.

APEXi Electronic SMART Accelerator Controller with Harness for Mazda RX8 (Series 1 & 2, 2003-2012) APEXi Electronic SMART Accelerator Controller with Harness for Mazda RX8 (Series 1 & 2, 2003-2012)

Boost 1 felt impressive indeed. Very easy to chirp the rears and get TRC active. This would probably be the all-round mode you could use every day. Lovely accelerator response and a positive feeling that the car is faster off the mark. Boost 2... where do I start? Perhaps with the black lines I've been leaving on my test track. This mode is absolutely ridiculous, and care should be taken when the car is in Sport mode and TRC turned off. You can easily get the car to light up the rears with the absolute minimum of effort. The first time I tested this I was genuinely surprised and had to tap the brakes and give out a sigh of shock. Amazing power delivery... it feels as though the car has been turbocharged and off the line performance is stellar. All in all, for around $250 delivered, this is one amazing piece of hardware. Overall rating: A++ Takes the sluggishness out of the IS to transform it into a spritely beast.

Lighting on an RX8 does more than keep you road-legal. The headlights, side indicators, reversing lamps and number plate lights define how the car presents. For example, tired or mismatched globes undermine an otherwise well-kept build. Whether you are refreshing the exterior with RX8 LED side indicators or cleaning up the cabin with an RX8 interior LED pack, the right part matters. Also, sourcing a Xenon component for a car already running that system is straightforward when you know what to look for.

LED and Xenon options covered

Our RX8 LED lights Australia range addresses the positions owners replace most often. Mazda RX8 LED headlights give a crisper output than faded originals. Moreover, they hold their output consistently over time. For the rear of the car, Mazda RX8 reversing lights and RX8 number plate lights are frequently overlooked. However, they are immediately noticeable once refreshed.

For cars equipped with Xenon factory lighting, we stock relevant Xenon-specific components. These include Mazda RX8 Xenon ballast replacements and RX8 Xenon conversion kit options. Because Xenon and LED systems differ in how they drive the lamp, confirm your car’s existing lighting arrangement before ordering.

Mazda RX8 LED headlights and lighting positions

  • Mazda RX8 LED headlights suit owners refreshing the primary forward lighting position with a consistent, modern output.
  • In addition, RX8 LED side indicators update exterior signalling and help the flanks read cleanly against refreshed headlights.
  • Meanwhile, Mazda RX8 reversing lights and RX8 number plate lights round out the rear. As a result, presentation stays cohesive after dark.
  • Also, RX8 interior LED pack options replace dim or inconsistent factory globes for a neater, more uniform feel every time you open the door.
  • Finally, Mazda RX8 Xenon ballast and RX8 Xenon conversion kit parts are specific to Xenon-equipped cars. Therefore, confirm your system type before selecting.

Getting the detail right

Small lighting changes add up quickly when they are coordinated. Matching temperature and finish across headlights, side markers, reversing lamps and cabin globes makes a real difference, separating a considered build from a piecemeal one.

Confirm the lamp position and connector type before ordering. Also, check the product listing for series fitment notes where applicable. For official Mazda vehicle information, see Mazda Australia.

Frequently Asked Questions

What lighting positions can I upgrade on my RX8?

The RX8 lighting range covers headlights, side indicators, reversing lights, number plate lights and interior cabin lighting. Xenon-specific components including ballasts and conversion kits are also available for cars already running a Xenon setup. Confirming the lamp position and your car's existing lighting arrangement before ordering is important, as the correct part depends on application rather than appearance alone.

Can I fit LED headlights to my RX8?

LED headlight options are available for the RX8 and suit owners looking to update the headlight position specifically. Confirm the connector type and your car's current lighting arrangement before purchasing, as LED headlights and Xenon-based systems use different components and are not interchangeable.

My RX8 has Xenon headlights - what parts are relevant for me?

RX8 owners with factory Xenon headlights should look at Xenon-specific components such as replacement ballasts and Xenon conversion kits rather than LED headlight units. These are designed for the Xenon system already fitted to the car, so confirming your car's lighting type before ordering is essential.

Are LED side indicators and number plate lights available for the RX8?

Yes, LED side indicator and number plate light options are part of the RX8 lighting range. These allow owners to refresh exterior signalling and rear lighting detail without changing the headlights, and are a straightforward way to tidy up how the car presents at close range.

Is there an interior LED lighting option for the RX8 cabin?

RX8 interior LED pack options are available and suit owners wanting a cleaner, more consistent look inside the cabin. Swapping out the factory incandescent interior lamps for LEDs is one of the simpler lighting changes you can make, with an immediately noticeable improvement in cabin presentation.

How do I know which lighting part is correct for my RX8?

Before ordering any lighting component, confirm the lamp position you intend to replace, your RX8's current lighting system (LED, halogen or Xenon), and the required connector or component type. This is especially important when comparing LED headlights, Xenon ballasts and Xenon conversion kits, as these suit different vehicles and applications.

Can I update just one or two lighting positions, or does it need to be a full refresh?

Individual lighting positions can be updated independently. The range covers headlights, indicators, reversing lights, number plate lamps and interior lighting as separate components, so owners can address a single worn lamp or gradually coordinate multiple positions to achieve a more consistent overall appearance.