Your cart

HASEPRO RX8 Parts and Accessories

HASEPRO produces precision-crafted Japanese interior and exterior accessories that bring a refined, finished look to your RX8 parts and detailing choices. If you’re sourcing Hasepro RX8 parts in Australia, check back here as listings become available.

RX8 Model

Model Filter

Price Range ($)

Rate Range - slider
$ 20 — $ 13000

Category

Category Filter

Type

Tag Filter

Colour

Colour Filter
Mazda RX8 valve caps in two HASEPRO retail packs

HASEPRO Air Valve Cap and Stem Cover Set (Black, 4pc) for Mazda RX8 (Series 1 & 2, 2003-2012)

Swap tired valve hardware for black anodised aluminium caps with carbon fibre detailing. A neat finishing touch for any RX8 wheel.

$20

RX8 headlight protection film graphic showing a curved pre-cut sheet and before-after headlight panels

HASEPRO Magical Art Revival Pre-Cut Headlight Protection and Restoration Film for Mazda RX8 (Series 1, 2003-2008)

Stick-on RX8 headlight protection film that clears yellowed Series 1 lenses and locks that clarity in for good.

$140

Mazda RX8 carbon side decals in black HASEPRO retail packaging on timber floor

HASEPRO Carbon Side Decal Dress-Up Set (2) for Mazda RX8 (Series 1 & 2, 2003-2012)

Pre-cut carbon-look side decals add a sharp profile accent to the RX8 body lines while leaving the original paint untouched beneath.

$150

RX8 headlight protection film graphic showing a curved pre-cut sheet and before-after headlight panels

HASEPRO Magical Art Revival Pre-Cut Headlight Protection and Restoration Film for Mazda RX8 (Series 2, 2009-2012)

Applies directly over yellowed 2009-2012 lenses to restore clarity and block further UV damage. Pre-cut for Series 2 headlights, no trimming needed.

$180

What owners are saying

AUTOEXE Sports Steering Wheel (Red Stitch) for Mazda RX8 (Series 2, 2009-2012) AUTOEXE Sports Steering Wheel (Red Stitch) for Mazda RX8 (Series 2, 2009-2012)

I recently installed AutoExe's Sport Steering Wheel on my ND. Taking my time and watching the various video's a few times, it took me a little over an hour, with no real issues, to install the new wheel. I couldn't be much happier with it. The wheel is extremely well made, at least as nice as OEM, with red stitching that matches my SRC paint nicely. It's a tiny bit smaller in diameter than stock, but much thicker, with a mild D shape for additional leg room. For those considering an improved steering wheel, this is a fabulous option in my opinion, particularly if you have red car.

GENUINE MAZDA OEM Intake Solenoid for Mazda RX8 (Series 1 & 2, 2003-2012) GENUINE MAZDA OEM Intake Solenoid for Mazda RX8 (Series 1 & 2, 2003-2012)

Happy 8's day people! For you series 2 owners, here's the easiest way I found to change these little suckers. RX8 Upgrades providing the genuine goods as always. Remove the air box/ CAI, remove throttle body and remove the top part of the UIM only, this will get you easy access to the solenoids. Now you could remove them from this point, but removing the oil filler neck along with the vacuum chamber the solenoids mount to makes it FAR easier to change them. This whole job can be done in an afternoon for a mechanically minded person. On reassemble, don't forget to place the vacuum reference back onto the bottom of the manifold (has a green check valve) otherwise no valve will work. Reassemble and enjoy. PN is KL01-18-741 for those chasing the part

AUTOEXE Premium Cat-Back Exhaust Muffler for Mazda RX8 (Series 1 & 2, 2003-2012) AUTOEXE Premium Cat-Back Exhaust Muffler for Mazda RX8 (Series 1 & 2, 2003-2012)

Just installed my spanking new Autoexe Stainless Muffler, and here's a short take of my initial impressions: The Autoexe catback is lovely - very unique 2 box design and the tips are the tapered kind (ie cut at an angle) each lasercut with the Autoexe logo. Very nicely polished midpipe which connects beautifully (and easily) with the exhaust outlet. Most importantly, the exhaust tips have a perfect visual alignment, unlike other exhausts i've seen where one tip protrudes out more than the other. The Autoexe definitely doesn't have this problem. Also, the 2 box design has a lower profile than stock. Previously, i used to scrape and even dent the exhaust box when clearing humps or even parking - not so with the Autoexe. The Autoexe performs really well, at least on my AT. There is a noticable increase in low end torque, and the car just feels substantially lighter. Revs are much more responsive, and the slight lag felt when launching the car seems to have melted away. Linear acceleration is also much faster (at least across 1st 3 gears), and i'm reaching 120-130kmh much faster on 2nd gear alone (NB mine is the 4spd AT). I'm very pleased with the low-torque gains on the Autoexe - finally i have that slight 'lurch' from start which the manuals seem to have, but the ATs don't. The Autoexe starts off idle with a really low, bassy growl. When first installed, it was barely audible, but sounds louder now. In time, the db will increase to an extent. On higher RPM revs, exhaust sounds deep and wet, and def not those shrilly Remus' we hear on the expressways from time to time. Installation was a breeze, and took under an hour at Monster Garage at Ubi, who's the only authorized dealer in Singapore, so these guys know their stuff. The torque/hp improvement was a shocker esp on low end, esp when mine's an AT. I've heard of bros installing Fujitsubos and HKSs that have either no or negative benefit. In this respect, I'm mighty pleased with the Autoexe. Sound is not loud, but a soft low bassy growl when idle, which develops into a mature wet sound at higher revs.

HASEPRO is a Japanese manufacturer known for tightly finished, detail-oriented accessories. The brand rewards owners who care about the look and feel of their interior and exterior. Products are typically aimed at the later stages of a build.

By that point the fundamentals are sorted, and the focus shifts to presentation, tactile quality and the small details that separate a considered car from an ordinary one. For owners searching for quality RX8 parts that improve cabin or exterior finish, HASEPRO’s approach is worth understanding.

What HASEPRO makes

HASEPRO specialises in Mazda RX8 accessories that address the finer points of a car’s presentation. Products commonly include carbon-look and textured panel treatments, trim overlays and detail accessories. These are designed to lift the factory finish without heavy modification.

Products are developed in Japan specifically for Japanese domestic and export models, so fitment precision is a genuine strength. Parts align cleanly with factory surfaces and don’t require trimming or adjusting to sit correctly.

What to look for when browsing listings

  • First, confirm the fitment information on the individual listing matches your RX8 series and interior specification.
  • Also, check the supplied contents. Some trim accessories include adhesive, installation tools or protective film as part of the kit.
  • In addition, consider how the finish (carbon-look, textured, gloss) will sit alongside your existing interior choices, so the result reads as intentional rather than mixed.
  • Finally, review installation requirements. Most HASEPRO accessories are owner-installable. However, some panels benefit from gentle heat application for the best adhesion.

Buying HASEPRO components in Australia

Sourcing genuine Hasepro RX8 parts Australia-wide can be difficult through general automotive retailers. For example, the brand’s distribution outside Japan is limited. However, RX8 Upgrades keeps this range in one place. When stock is available, you can buy genuine Hasepro components without chasing multiple import channels. There are no HASEPRO listings available in this range at the moment. Meanwhile, check back as new stock is added.

Frequently Asked Questions

What kind of products does HASEPRO make for the RX8?

HASEPRO is a Japanese accessories brand whose RX8 range focuses on presentation and detail work - items that refine the interior or exterior finish of the car. Think trim pieces, accent panels and similar accessories rather than mechanical performance parts.

Are HASEPRO accessories available for both Series 1 and Series 2 RX8 models?

Fitment varies by individual product, so check the listing details carefully before ordering. Series 1 and Series 2 RX8 models can differ in trim dimensions and panel layouts, so confirming the correct fitment for your build year is essential.

Does HASEPRO have any RX8 products listed right now?

There are currently no HASEPRO product listings available at RX8 Upgrades. Check back as stock and listing availability can change, and the range will be updated when relevant items come in.

How do I know if a HASEPRO accessory will suit my RX8's current interior or exterior finish?

Review the individual listing for finish type, colour and the specific area of the car it is designed for, then consider how it will work alongside your existing specification. Accessories are most effective when they complement the overall condition and style of the vehicle rather than being chosen in isolation.

Is HASEPRO a reputable brand for Mazda accessories?

HASEPRO is an established Japanese manufacturer with a focus on interior and exterior trim accessories for Japanese domestic market vehicles, including Mazda models. Their products are typically designed to precise OEM panel tolerances, which matters for a clean, factory-consistent finish on an RX8.